Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car guilty – your headlights, as well known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Mini Mini? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mini Mini.

adjust-headlights-mini-mini

Why adjust the headlights of your Mini Mini?

So let’s begin our content with the benefit of adjusting the headlights of your Mini Mini. For most of us, our headlights are adjusted good enough, and they appear to light up enough through the night. Sadly this is not constantly the case and looking at this setting, either because the headlights on your Mini Mini are not bright enough, or because you have the feeling that they are too weak is a great idea .

Adjusting the high beams of your Mini Mini for safety

First of all, the headlight adjustment of a Mini Mini must be carried out for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Mini Mini . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Mini Mini for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Mini Mini?

We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Mini Mini? This setting may appear a bit difficult, but by simply following the guidelines you should have the ability to do it without too much problem.

Preparations to adjust the headlights of a Mini Mini

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Mini Mini

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Mini Mini (they are in general designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Mini Mini is coherent, do not think twice to check it after you have driven it, often it may move.

.
If you want to adjust the fog lights on your Mini Mini, please read our content on this subject.

If you have any additional questions about the Mini Mini, do not hesitate to consult our Mini Mini category.