Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle guilty – your headlights, also known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Nissan Cabstar? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Cabstar.
Why adjust the headlights of your Nissan Cabstar?
So let’s start our content with the benefit of adjusting the headlights of your Nissan Cabstar. For most of us, our headlights are adjusted good enough, and they appear to light up enough at nighttime. Sadly this is not always the case and checking this setting, either because the headlights on your Nissan Cabstar are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Nissan Cabstar for safety
First of all, the headlight adjustment of a Nissan Cabstar must be carried out for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Nissan Cabstar . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Nissan Cabstar for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Cabstar?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Nissan Cabstar? This adjustment might seem a bit complicated, but by simply following the guidance you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Nissan Cabstar
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Cabstar
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Nissan Cabstar (they are generally marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Nissan Cabstar is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Nissan Cabstar, please read our content on this subject matter.
Whenever you have any additional questions about the Nissan Cabstar, do not hesitate to consult our Nissan Cabstar category.
