If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle guilty – your headlights, as well known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Mercedes Benz GLA Class? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Mercedes Benz GLA Class.
Why adjust the headlights of your Mercedes Benz GLA Class?
So let’s begin our article with the interest of adjusting the headlights of your Mercedes Benz GLA Class. For the majority of us, our headlights are adjusted well enough, and they appear to light up enough during the night. However this is not constantly the case and looking at this setting, either because the headlights on your Mercedes Benz GLA Class are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Mercedes Benz GLA Class for safety
First of all, the headlight adjustment of a Mercedes Benz GLA Class must be carried out for a simple safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Mercedes Benz GLA Class . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mercedes Benz GLA Class for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mercedes Benz GLA Class?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Mercedes Benz GLA Class? This setting might seem a bit difficult, but by simply following the instructions you should have the ability to complete it without too much concern.
Preparations to adjust the headlights of a Mercedes Benz GLA Class
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Mercedes Benz GLA Class
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Mercedes Benz GLA Class (they are in most cases marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Mercedes Benz GLA Class is logical, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Mercedes Benz GLA Class, please browse our article on this subject.
To get more tips on the Mercedes Benz GLA Class, take a look at the Mercedes Benz GLA Class category.
