Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car responsible – your headlights, also known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Audi A6? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi A6.
Why adjust the headlights of your Audi A6?
So let’s start our article with the benefit of adjusting the headlights of your Audi A6. For most of us, our headlights are adjusted sufficiently, and they appear to light up enough after dark. However this is not constantly the case and examining this setting, either because the headlights on your Audi A6 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Audi A6 for safety
To begin with, the headlight adjustment of a Audi A6 must be conducted for a basic safety motive. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Audi A6 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Audi A6 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi A6?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Audi A6? This adjustment may seem a bit difficult, but by following the guidelines you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Audi A6
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Audi A6
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Audi A6 (they are generally designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Audi A6 is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Audi A6, please read our article on this subject.
If you wish more tutorials on the Audi A6, go to our Audi A6 category.
