Whether it’s for your specific safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are constantly effective is necessary. In reality, bulbs are wearing units that will predictably burn out as time passes and therefore need to be replaced. You’re most certainly in this article because one of your parking lights is burnt out and you’re struggling with how to change your Mercedes Benz GLA Class’s license plate bulb, we’ve written this content page to help you do it all on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mercedes Benz GLA Class.
How to change the license plate bulb on your Mercedes Benz GLA Class throughout the outside
This method is the easiest of the two, in truth, for this one you will only need to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this article to clarify the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Mercedes Benz GLA Class. Whether it’s the front or the back of your car the technique will be the same.
Here are a few simple actions to follow to carry out this service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Benz GLA Class
- Use your screwdriver or knife to eject the bulb from its spot, in the event that you are scared of breaking anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the achievement of the process.
.
How to change the number plate bulb on your Mercedes Benz GLA Class without outside access
Second section of our article, swap this license plate bulb on your Mercedes Benz GLA Class without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Mercedes Benz GLA Class
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much force otherwise you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Mercedes Benz GLA Class
Finally last option, you must change the bulb on the backplate of your Mercedes Benz GLA Class, but you cannot open the cover from the outside of your car. In this case, here is the method to operate this operation:
- Unplug the battery from your Mercedes Benz GLA Class
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Mercedes Benz GLA Class, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main ways for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to realize it following the outline of this article. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Mercedes Benz GLA Class. If you wish to change other bulbs like the position light bulbs on your Mercedes Benz GLA Class or the low beam bulbs on Mercedes Benz GLA Class, don’t hesitate to read our content articles which demonstrate you the procedure to follow.
If perhaps you have any additional questions about the Mercedes Benz GLA Class, do not hesitate to consult our Mercedes Benz GLA Class category.
