If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car at fault – your headlights, also called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Mazda 6? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Mazda 6.
Why adjust the headlights of your Mazda 6?
So let’s start our content with the benefit of adjusting the headlights of your Mazda 6. For many people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Sadly this is not always the case and examining this setting, either because the headlights on your Mazda 6 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Mazda 6 for safety
To begin with, the headlight adjustment of a Mazda 6 must be carried out for a very easy safety reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Mazda 6 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Mazda 6 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mazda 6?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Mazda 6? This adjustment may appear a bit complex, but by following the guidelines you should have the ability to complete it without too much issue.
Preparations to adjust the headlights of a Mazda 6
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mazda 6
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Mazda 6 (they are generally designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Mazda 6 is logical, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Mazda 6, please browse our content on this subject.
To get more tips on the Mazda 6, take a look at the Mazda 6 category.
