Your car’s handbrake is a required basic safety feature according to the highway code, in fact , this aims to stop your Mazda 6, even over a slight slope. It must be in addition to the main brake controls. It will be possible that over time the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you could feel that it truly is no longer blocking your car. To address these complications, we will look at how to adjust the hand brake on your Mazda 6 . To do this, first we will see the adjustment of the manual handbrake on Mazda 6 , then simply, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on Mazda 6?
Thus we begin our content with the hand brake adjustment of a Mazda 6 in its manual version. This kind of version performs in a simple way having a system of cable and screws that allow you to manage the tension of the device and thus to modify the stroke of the lever of the handbrake. To act on it you will need to act on these screws in order to stretch out the handbrake cable of the Mazda 6 . In any case, before adjusting the hand brake, you must be sure your rear wheels aren’t blocked through the adjustment. Make sure you find under the detailed procedure to carry out this kind of intervention:
- On the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once carried out, you should discover a trapdoor on your handbrake, open it up to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench to allow you to change the cable tension.
- Now screw on the locking mechanism nuts in both sides, make sure you make the comparable changes on both sides to keep a balanced brake, and be sure the hand brake handle of your Mazda 6 has a stroke of about 3 notches.
- Tighten up the locknuts and test out the fastening of the rims of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening screws until you get a great ideal configuration
.
If you don’t have access to the handbrake flap of the Mazda 6, the adjustment will be exactly the same however it will be done by passing under your car with the level of your handbrake handle. Make sure you put your car on the stand before any action.
How do I adjust the automatic handbrake of my Mazda 6?
Second system of handbrake adjustment in Mazda 6 , this is an automatic handbrake, in contrast to the manual one, this one is done upon the brake drums or calipers, and is designed to change automatically for the wear of the brake shoes or disc brake pads. It may be that if you soon have to acquire brake pads, your handbrake will lose power, listed below are the steps for taking to check if the tension of your handbrake is the right one:
- Bear in mind that an automatic handbrake cannot be modified directly because it is designed to adapt alone to the use of the disc brake pads or pads of your Mazda 6.
- You can nonetheless check that the system is functioning effectively by putting your vehicle on the stand and checking by driving under the auto that the pads are still in good performing order.
- For drum brakes it will probably be necessary to take apart the tires to check your the shoes, we all advise you to have it achieved by a specialist.
- Be sure you replace your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Mazda 6 by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it fears a security component of your car, namely the adjustment of the handbrake of the Mazda 6 , we advise you to go to a technician who can adjust your handbrake for a about fifty euros . If you have problems with vibrations when braking on Mazda 6, do not wait to consult our content which works with this issue.
If perhaps you have any additional questions about the Mazda 6, do not hesitate to consult our Mazda 6 category.
