If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle to blame – your headlights, as well often known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Mazda 5? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mazda 5.
Why adjust the headlights of your Mazda 5?
So let’s start our content with the interest of adjusting the headlights of your Mazda 5. For many of us, our headlights are adjusted well enough, and they seem to light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the headlights on your Mazda 5 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Mazda 5 for safety
First of all, the headlight adjustment of a Mazda 5 must be achieved for a basic safety reason. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Mazda 5 . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mazda 5 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mazda 5?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Mazda 5? This adjustment may seem a bit complex, but by following the guidance you should have the ability to complete it without too much issue.
Preparations to adjust the headlights of a Mazda 5
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mazda 5
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Mazda 5 (they are usually marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Mazda 5 is coherent, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Mazda 5, please go through our content on this subject matter.
Whenever you have any additional questions about the Mazda 5, do not hesitate to consult our Mazda 5 category.
