If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car to blame – your headlights, as well called high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Kia Rio 3? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Kia Rio 3.
Why adjust the headlights of your Kia Rio 3?
So let’s start our article with the benefit of adjusting the headlights of your Kia Rio 3. For most people, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Unfortunately this is not always the case and examining this setting, either because the headlights on your Kia Rio 3 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Kia Rio 3 for safety
First of all, the headlight adjustment of a Kia Rio 3 must be finished for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Kia Rio 3 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Kia Rio 3 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Kia Rio 3?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Kia Rio 3? This adjustment may seem a bit complicated, but by following the guidance you should have the ability to complete it without too much trouble.
Preparations to adjust the headlights of a Kia Rio 3
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Kia Rio 3
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Kia Rio 3 (they are in general designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Kia Rio 3 is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Kia Rio 3, please read our article on this subject.
If you want more guides on the Kia Rio 3, go to our Kia Rio 3 category.
