If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car guilty – your headlights, also known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Jeep Cherokee? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Jeep Cherokee.
Why adjust the headlights of your Jeep Cherokee?
So let’s start our article with the interest of adjusting the headlights of your Jeep Cherokee. For most people, our headlights are adjusted sufficiently, and they appear to light up enough after dark. However this is not always the circumstance and looking at this setting, either because the headlights on your Jeep Cherokee are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Jeep Cherokee for safety
First of all, the headlight adjustment of a Jeep Cherokee must be made for a simple safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Jeep Cherokee . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Jeep Cherokee for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Jeep Cherokee?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Jeep Cherokee? This setting may appear a bit complex, but by simply following the instructions you should have the ability to accomplish it without too much trouble.
Preparations to adjust the headlights of a Jeep Cherokee
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Jeep Cherokee
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Jeep Cherokee (they are usually marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Jeep Cherokee is logical, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Jeep Cherokee, please browse our article on this subject matter.
To get more tips on the Jeep Cherokee, take a look at the Jeep Cherokee category.
