Encountering problems on your automobile is really annoying, moreover the financial aspect that these problems represent, one must also add the time lost with a non-functional Jeep Cherokee and the time spent to diagnose and repair the malfunction. Nevertheless, some problems are less significant than others, which is not to say that they do not get worried us. On this page we are going to seek out a trouble that can occur to most of us, feeling vibrations at acceleration on Jeep Cherokee. This trouble can oftentimes be difficult to perceive but it must be dealt with. We will therefore commence our article content with the roots of these vibrations on Jeep Cherokee, then, with the answers you have to reduce or stop these tremors.

acceleration-vibrations-jeep-cherokee

Why does my Jeep Cherokee produce vibrations when accelerating?

So let’s commence our article content with the roots of this sort of trouble on your car. You should already know that an engine, especially if it is old or if it has been driven quite a bit, can naturally vibrate without being a trouble behind it. Large diesel engines, especially those with a lot of torque, can provoke this kind of sensation, both at idle and when accelerating.

I feel vibrations on my Jeep Cherokee only when accelerating

Let’s take the most interesting circumstance for us in this article content. The fact that you undergo trembling on your Jeep Cherokee during your acceleration phases, in this situation you will have to examine the condition of several elements because several of elements can be at the beginning of these vibrations and whether or not you are unfortunate a combination of several of them may also be possible, here is the list of auto parts that can be involved.

  • Turbo: If the turbo of your Jeep Cherokee is defective, it may provoke vibrations that you will feel when you accelerate at the moment it is activated.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may disturb the behavior of your turbo and develop vibrations that you may feel during acceleration of your Jeep Cherokee.

    • .

  • If the turbo is punctured or ruined, the result will be alike, the power supply of your turbo will be troubled and its behavior too. Make sure to visually check their state.

I’m experiencing vibrations on my Jeep Cherokee at acceleration and deceleration

We will now look into the scenario where you feel vibrations on your Jeep Cherokee when you are accelerating but also when you are idling. If you only feel vibrations when you are idling on your Jeep Cherokee, please seek advice from our article content dedicated to this trouble to get rid of your problem. If, on the other hand, you identify that your Jeep Cherokee vibrates when accelerating but also when it is stopped, here is the list of elements to check:

  • EGR valve: In fact this valve which handles the return of exhaust gases for pollution standards can become dirty and disrupt the evacuation of exhaust gases which can provoke Jeep Cherokee vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will generate the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running correctly.
  • Fuel Filter: Like the injectors, if the filter is blocked it will not let the fuel pass correctly and therefore disrupt the operation of your Jeep Cherokee, up to the point of leading to vibrations during acceleration.

Here are the main causes of a Jeep Cherokee that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Jeep Cherokee? What can I do?

To conclude, in this last section, we will give you the possibilities available to you to overcome these tremors on your car when you accelerate. Here is the best attitude to adopt based on the part that is involved:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Jeep Cherokee, it will be good for you to control all the auto parts connected to it because changing a complete turbo is a big budget and generally the trouble does not come directly from the turbo. So remember to take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Jeep Cherokee to your garage.
  • EGR valve: The EGR valve has the advantage that it is more often than not easy to access and simple to take apart/clean. You can always check out it and clean it, for this see our article content on cleaning the EGR valve of an Jeep Cherokee.
  • Injectors: Injectors are very delicate auto parts and a few impurities may be enough to disrupt their operation. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a professional.
  • Fuel Filter: If it is the fuel filter, only replace it. A fuel filter doesn’t clean itself, so if it is clogged you will only have to replace it with a new one.

Now you have all the information you need to find the origin of the vibrations at acceleration on your Jeep Cherokee. If you don’t feel able to execute certain operations don’t hesitate to go to your motor mechanic.

If you have any further questions about the Jeep Cherokee, do not hesitate to consult our Jeep Cherokee category.