Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your car to take responsibility – your headlights, also often known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Jaguar XE? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Jaguar XE.
Why adjust the headlights of your Jaguar XE?
So let’s start our content page with the benefit of adjusting the headlights of your Jaguar XE. For most people, our headlights are adjusted good enough, and they seem to light up enough at night. Regrettably this is not always the case and looking at this setting, either because the headlights on your Jaguar XE are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Jaguar XE for safety
First of all, the headlight adjustment of a Jaguar XE must be achieved for a very easy safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Jaguar XE . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Jaguar XE for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Jaguar XE?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Jaguar XE? This adjustment might seem a bit difficult, but by following the guidelines you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a Jaguar XE
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Jaguar XE
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Jaguar XE (they are generally marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Jaguar XE is coherent, do not hesitate to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Jaguar XE, please read our content page on this subject.
To discover more tips on the Jaguar XE, take a look at the Jaguar XE category.
