Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle responsible – your headlights, as well known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Buick Regal? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Buick Regal.

adjust-headlights-buick-regal

Why adjust the headlights of your Buick Regal?

So let’s start our content with the benefit of adjusting the headlights of your Buick Regal. For many people, our headlights are adjusted good enough, and they seem to light up enough at night. Sadly this is not constantly the circumstance and checking this setting, either because the headlights on your Buick Regal are not bright enough, or because you have the sensation that they are too weak is a great idea .

Adjusting the high beams of your Buick Regal for safety

To begin with, the headlight adjustment of a Buick Regal must be done for a very easy security explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Buick Regal . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Buick Regal for legal reasons

In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Buick Regal?

We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Buick Regal? This adjustment might seem a bit complex, but by simply following the instructions you should have the ability to accomplish it without too much concern.

Preparations to adjust the headlights of a Buick Regal

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Buick Regal

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Buick Regal (they are usually marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Buick Regal is coherent, do not hesitate to verify it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Buick Regal, please go through our content on this subject matter.

If you wish more guides on the Buick Regal, go to our Buick Regal category.