Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car to blame – your headlights, also named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Jaguar E-Pace? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Jaguar E-Pace.
Why adjust the headlights of your Jaguar E-Pace?
So let’s begin our article with the interest of adjusting the headlights of your Jaguar E-Pace. For many people, our headlights are adjusted well enough, and they appear to light up enough at night. Regrettably this is not always the circumstance and looking at this setting, either because the headlights on your Jaguar E-Pace are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Jaguar E-Pace for safety
To begin with, the headlight adjustment of a Jaguar E-Pace must be conducted for a basic security motive. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Jaguar E-Pace . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Jaguar E-Pace for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Jaguar E-Pace?
We will now go forward to the part that concerns you the most in this post, how to adjust the headlights of his Jaguar E-Pace? This adjustment may seem a bit complex, but by following the guidance you should be able to perform it without too much trouble.
Preparations to adjust the headlights of a Jaguar E-Pace
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Jaguar E-Pace
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Jaguar E-Pace (they are in most cases marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Jaguar E-Pace is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Jaguar E-Pace, please read our article on this subject.
If perhaps you have any additional questions about the Jaguar E-Pace, do not hesitate to consult our Jaguar E-Pace category.
