Whether for your own security, for roadworthiness testing or to prevent a fine, being certain your turn signal bulbs are constantly functioning is imperative. Obviously, bulbs are wearing parts that will obviously burn out after a while and consequently need to be swapped out. You’re most probably here because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Jaguar E-Pace, we’ve made this article to enable you do it alone without having to go to your technician. To begin , we will have a look at examining a burnt-out rear turn signal bulb on your Jaguar E-Pace and in a second step, how to change the rear turn signal bulb on your Jaguar E-Pace.
How to find out if the rear turn signal bulb on your Jaguar E-Pace is burnt-out or needs to be replaced?
When you drive your car you don’t constantly have the possibility to check all the security features of your Jaguar E-Pace. Obviously, you are generally on the go and tend to get into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore important to spend some time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Jaguar E-Pace, but you didn’t detect it. Here are the two basic ways to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Jaguar E-Pace, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functional.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Jaguar E-Pace, you will realize that the time between each “click” is much closer, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Jaguar E-Pace or your position lights on Jaguar E-Pace, don’t be reluctant to have a look at our web content to help you to complete this replacement.
Changing the rear turn signal bulb on my Jaguar E-Pace
Now let’s go to the most instersting step of this article, how to change the rear turn signal bulb on Jaguar E-Pace? Please be aware that this method is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Jaguar E-Pace, see our specific article content. However, here are the detailed steps to follow in order to do this act properly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Jaguar E-Pace. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is functioning in the right way
.
To find more tips on the Jaguar E-Pace, take a look at the Jaguar E-Pace category.
