Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle responsible – your headlights, as well named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Hyundai Tucson? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Hyundai Tucson.


Why adjust the headlights of your Hyundai Tucson?

So let’s begin our content with the benefit of adjusting the headlights of your Hyundai Tucson. For the majority of us, our headlights are adjusted well enough, and they seem to light up enough through the night. However this is not always the case and checking this setting, either because the headlights on your Hyundai Tucson are not bright enough, or because you have the impression that they are too weak is a great idea .

Adjusting the high beams of your Hyundai Tucson for safety

First of all, the headlight adjustment of a Hyundai Tucson must be conducted for a simple security explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Hyundai Tucson . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Hyundai Tucson for legal reasons

In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Hyundai Tucson?

We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Hyundai Tucson? This adjustment might seem a bit difficult, but by simply following the guidelines you should have the ability to perform it without too much issue.

Preparations to adjust the headlights of a Hyundai Tucson

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.

The headlight adjustment of his Hyundai Tucson

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Hyundai Tucson (they are usually marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Hyundai Tucson is logical, do not think twice to verify it after you have driven it, oftentimes it may move.

If you want to adjust the fog lights on your Hyundai Tucson, please go through our content on this subject matter.

To find more tips on the Hyundai Tucson, take a look at the Hyundai Tucson category.