If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle responsible – your headlights, as well known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Honda Pilot? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Honda Pilot.
Why adjust the headlights of your Honda Pilot?
So let’s start our article with the benefit of adjusting the headlights of your Honda Pilot. For the majority of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Regrettably this is not always the circumstance and checking this setting, either because the headlights on your Honda Pilot are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Honda Pilot for safety
To begin with, the headlight adjustment of a Honda Pilot must be done for a very easy safety reason. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Honda Pilot . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Honda Pilot for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Honda Pilot?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Honda Pilot? This setting might seem a bit complex, but by following the recommendations you should be able to do it without too much problem.
Preparations to adjust the headlights of a Honda Pilot
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Honda Pilot
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Honda Pilot (they are in general marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Honda Pilot is coherent, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Honda Pilot, please go through our article on this subject matter.
If perhaps you have any further questions about the Honda Pilot, do not hesitate to consult our Honda Pilot category.
