Regardless it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are constantly effective is necessary. In fact, bulbs are wearing parts that will surely burn out with time and as a consequence need to be changed. You’re almost certainly here because one of your parking lights is burnt out and you’re struggling with how to change your Honda Pilot’s license plate bulb, we’ve written this content page to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Honda Pilot.
How to swap the license plate bulb on your Honda Pilot through the outside
This tactic is the fastest of the two, in reality, for this one you will only have to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this article content to teach you the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Honda Pilot. Regardless it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple actions to follow to perform this maintenance tasks:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Honda Pilot
- Use your screwdriver or knife to remove the bulb from its place, in the event you are afraid of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the success of the task.
.
How to change the number plate bulb on your Honda Pilot without outside access
Second section of our item, swap this license plate bulb on your Honda Pilot without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Honda Pilot
To swap the one on the front plate, nothing could be less difficult, you will have to position yourself under the motor vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much force or you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Honda Pilot
Finally last option, you must swap the bulb on the backplate of your Honda Pilot, but you simply cannot open the cover from the outside of your motor vehicle. In such a case, here is the approach to conduct this operation:
- Unplug the battery from your Honda Pilot
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Honda Pilot, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for swapping license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to do it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Honda Pilot. If you wish to change other bulbs like the position light bulbs on your Honda Pilot or the low beam bulbs on Honda Pilot, don’t be reluctant to read our articles which describe you the operation to follow.
If perhaps you have any further questions about the Honda Pilot, do not hesitate to consult our Honda Pilot category.
