If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your car responsible – your headlights, also identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Honda Insight? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Honda Insight.
Why adjust the headlights of your Honda Insight?
So let’s start our content page with the interest of adjusting the headlights of your Honda Insight. For many of us, our headlights are adjusted well enough, and they appear to light up enough at night. Regrettably this is not constantly the case and examining this setting, either because the headlights on your Honda Insight are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Honda Insight for safety
First of all, the headlight adjustment of a Honda Insight must be carried out for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Honda Insight . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Honda Insight for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Honda Insight?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Honda Insight? This adjustment may seem a bit complicated, but by following the guidance you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Honda Insight
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Honda Insight
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Honda Insight (they are in general marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Honda Insight is coherent, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Honda Insight, please read our content page on this subject matter.
If you have any further questions about the Honda Insight, do not hesitate to consult our Honda Insight category.
