If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car at fault – your headlights, also known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Ford Focus C-max? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Focus C-max.


Why adjust the headlights of your Ford Focus C-max?

So let’s start our content page with the interest of adjusting the headlights of your Ford Focus C-max. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough during the night. Sadly this is not constantly the circumstance and checking this setting, either because the headlights on your Ford Focus C-max are not bright enough, or because you have the impression that they are too weak is a great idea .

Adjusting the high beams of your Ford Focus C-max for safety

To begin with, the headlight adjustment of a Ford Focus C-max must be carried out for a very easy safety explanation. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Ford Focus C-max . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Ford Focus C-max for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Ford Focus C-max?

We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Ford Focus C-max? This adjustment might seem a bit complicated, but by following the guidelines you should have the ability to perform it without too much issue.

Preparations to adjust the headlights of a Ford Focus C-max

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Ford Focus C-max

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Ford Focus C-max (they are generally designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, check that the headlights setting of your Ford Focus C-max is logical, do not hesitate to check it after you have driven it, sometimes it may move.

If you want to adjust the fog lights on your Ford Focus C-max, please browse our content page on this subject.

If you want more tutorials on the Ford Focus C-max, go to our Ford Focus C-max category.