Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle at fault – your headlights, as well known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Ford F 150 ? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford F 150 .
Why adjust the headlights of your Ford F 150 ?
So let’s begin our article with the interest of adjusting the headlights of your Ford F 150 . For many of us, our headlights are adjusted good enough, and they appear to light up enough during the night. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Ford F 150 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Ford F 150 for safety
First of all, the headlight adjustment of a Ford F 150 must be done for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Ford F 150 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford F 150 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford F 150 ?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Ford F 150 ? This adjustment may seem a bit difficult, but by following the guidelines you should be able to accomplish it without too much concern.
Preparations to adjust the headlights of a Ford F 150
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford F 150
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Ford F 150 (they are usually marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Ford F 150 is coherent, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Ford F 150 , please go through our article on this subject matter.
If you need more guides on the Ford F 150 , go to our Ford F 150 category.
