If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car responsible – your headlights, also often known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Ford Escape? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Escape.
Why adjust the headlights of your Ford Escape?
So let’s begin our article with the interest of adjusting the headlights of your Ford Escape. For many people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Unfortunately this is not constantly the case and examining this setting, either because the headlights on your Ford Escape are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Ford Escape for safety
To begin with, the headlight adjustment of a Ford Escape must be conducted for a basic safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Ford Escape . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford Escape for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Escape?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Ford Escape? This adjustment may seem a bit difficult, but by simply following the instructions you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a Ford Escape
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Escape
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Ford Escape (they are generally designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Ford Escape is logical, do not hesitate to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Ford Escape, please read our article on this subject.
To discover more tips on the Ford Escape, take a look at the Ford Escape category.
