If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car to blame – your headlights, as well often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Ds Ds 3? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Ds Ds 3.
Why adjust the headlights of your Ds Ds 3?
So let’s begin our article with the benefit of adjusting the headlights of your Ds Ds 3. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough through the night. Sadly this is not constantly the case and checking this setting, either because the headlights on your Ds Ds 3 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Ds Ds 3 for safety
First of all, the headlight adjustment of a Ds Ds 3 must be finished for a very easy security motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Ds Ds 3 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Ds Ds 3 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ds Ds 3?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Ds Ds 3? This adjustment may appear a bit difficult, but by following the guidance you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Ds Ds 3
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ds Ds 3
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Ds Ds 3 (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Ds Ds 3 is coherent, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Ds Ds 3, please read our article on this subject matter.
To find more tips on the Ds Ds 3, take a look at the Ds Ds 3 category.
