Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle at fault – your headlights, also identified as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Citroen Saxo? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Citroen Saxo.
Why adjust the headlights of your Citroen Saxo?
So let’s begin our content page with the interest of adjusting the headlights of your Citroen Saxo. For many people, our headlights are adjusted sufficiently, and they seem to light up enough at night. Sadly this is not constantly the circumstance and checking this setting, either because the headlights on your Citroen Saxo are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Citroen Saxo for safety
First of all, the headlight adjustment of a Citroen Saxo must be done for a very easy safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Citroen Saxo . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Citroen Saxo for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Citroen Saxo?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Citroen Saxo? This setting might seem a bit difficult, but by following the guidelines you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Citroen Saxo
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Citroen Saxo
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Citroen Saxo (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Citroen Saxo is logical, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Citroen Saxo, please read our content page on this subject.
If you need more guides on the Citroen Saxo, go to our Citroen Saxo category.
