Whether it’s for your specific safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are constantly functional is really important. In fact, bulbs are wearing parts that will obviously burn out over the years and as a result need to be replaced. You’re perhaps here because one of your parking lights is burnt out and you’re wanting to know how to change your Citroen Saxo’s license plate bulb, we’ve created this article to help you do it without any help and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Citroen Saxo.
How to replace the license plate bulb on your Citroen Saxo coming from the outside
This solution is the quickest of the two, in fact, for this one you will simply require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second section of this content page to explain the way.
So let’s start with changing the number plate bulb by going through the outside of your Citroen Saxo. Whether it’s the front or the back of your automobile the process will be the same.
Here are a few simple steps to follow to execute this service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Citroen Saxo
- Use your screwdriver or knife to eject the bulb from its location, in the event you are scared of breaking anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the success of the procedure.
.
How to change the number plate bulb on your Citroen Saxo without outside access
Second section of our document, replace this license plate bulb on your Citroen Saxo without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Citroen Saxo
To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much pressure otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Citroen Saxo
Finally last solution, you must replace the bulb on the backplate of your Citroen Saxo, but you are not able to open the cover from the outside of your automobile. In such a case, here is the tactic to conduct this operation:
- Disconnect the battery from your Citroen Saxo
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Citroen Saxo, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Citroen Saxo. If you want to change other bulbs like the position light bulbs on your Citroen Saxo or the low beam bulbs on Citroen Saxo, don’t be reluctant to consult our content articles which explain you the process to follow.
Whenever you have any further questions about the Citroen Saxo, do not hesitate to consult our Citroen Saxo category.
