Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car guilty – your headlights, also called high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Chevrolet Cruze? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Cruze.
Why adjust the headlights of your Chevrolet Cruze?
So let’s start our content page with the interest of adjusting the headlights of your Chevrolet Cruze. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough during the night. Unfortunately this is not always the circumstance and looking at this setting, either because the headlights on your Chevrolet Cruze are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Chevrolet Cruze for safety
First of all, the headlight adjustment of a Chevrolet Cruze must be finished for a basic safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Chevrolet Cruze . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Cruze for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Cruze?
We will now go forward to the section that concerns you the most in this article, how to adjust the headlights of his Chevrolet Cruze? This adjustment may seem a bit complicated, but by following the guidance you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Chevrolet Cruze
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Cruze
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Chevrolet Cruze (they are in general marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Chevrolet Cruze is logical, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Cruze, please go through our content page on this subject.
To get more tips on the Chevrolet Cruze, take a look at the Chevrolet Cruze category.
