Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle to take responsibility – your headlights, also called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Chevrolet Colorado? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Colorado.
Why adjust the headlights of your Chevrolet Colorado?
So let’s begin our article with the benefit of adjusting the headlights of your Chevrolet Colorado. For most of us, our headlights are adjusted well enough, and they seem to light up enough at nighttime. Regrettably this is not always the circumstance and checking this setting, either because the headlights on your Chevrolet Colorado are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Chevrolet Colorado for safety
To begin with, the headlight adjustment of a Chevrolet Colorado must be made for a basic security explanation. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Chevrolet Colorado . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Colorado for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Colorado?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Chevrolet Colorado? This setting may appear a bit complex, but by following the guidance you should have the ability to do it without too much concern.
Preparations to adjust the headlights of a Chevrolet Colorado
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Colorado
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Chevrolet Colorado (they are generally designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Chevrolet Colorado is logical, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Colorado, please read our article on this subject.
If you want more guides on the Chevrolet Colorado, go to our Chevrolet Colorado category.
