If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle at fault – your headlights, also named high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Cadillac Escalade? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Cadillac Escalade.
Why adjust the headlights of your Cadillac Escalade?
So let’s start our content with the benefit of adjusting the headlights of your Cadillac Escalade. For many people, our headlights are adjusted well enough, and they appear to light up enough at night. Regrettably this is not constantly the case and checking this setting, either because the headlights on your Cadillac Escalade are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Cadillac Escalade for safety
First of all, the headlight adjustment of a Cadillac Escalade must be made for a simple security reason. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Cadillac Escalade . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Cadillac Escalade for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Cadillac Escalade?
We will now go forward to the part that concerns you the most in this post, how to adjust the headlights of his Cadillac Escalade? This adjustment might seem a bit complex, but by simply following the guidelines you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a Cadillac Escalade
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Cadillac Escalade
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Cadillac Escalade (they are in most cases marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Cadillac Escalade is logical, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Cadillac Escalade, please go through our content on this subject.
To discover more tips on the Cadillac Escalade, take a look at the Cadillac Escalade category.
