If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle to take responsibility – your headlights, also identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Bmw Serie 5? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Bmw Serie 5.
Why adjust the headlights of your Bmw Serie 5?
So let’s start our content with the benefit of adjusting the headlights of your Bmw Serie 5. For the majority of us, our headlights are adjusted well enough, and they appear to light up enough during the night. Sadly this is not constantly the circumstance and looking at this setting, either because the headlights on your Bmw Serie 5 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Bmw Serie 5 for safety
To begin with, the headlight adjustment of a Bmw Serie 5 must be carried out for a very easy safety reason. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Bmw Serie 5 . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Bmw Serie 5 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Bmw Serie 5?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Bmw Serie 5? This adjustment may appear a bit difficult, but by following the recommendations you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Bmw Serie 5
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Bmw Serie 5
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Bmw Serie 5 (they are generally marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Bmw Serie 5 is logical, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Bmw Serie 5, please go through our content on this subject.
If you need more tutorials on the Bmw Serie 5, go to our Bmw Serie 5 category.
