Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle at fault – your headlights, as well identified as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Bmw Serie 1 F20? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Bmw Serie 1 F20.
Why adjust the headlights of your Bmw Serie 1 F20?
So let’s start our content page with the benefit of adjusting the headlights of your Bmw Serie 1 F20. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough at night. Regrettably this is not constantly the case and looking at this setting, either because the headlights on your Bmw Serie 1 F20 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Bmw Serie 1 F20 for safety
First of all, the headlight adjustment of a Bmw Serie 1 F20 must be finished for a simple security reason. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Bmw Serie 1 F20 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Bmw Serie 1 F20 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Bmw Serie 1 F20?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Bmw Serie 1 F20? This setting might seem a bit complex, but by simply following the recommendations you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Bmw Serie 1 F20
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Bmw Serie 1 F20
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Bmw Serie 1 F20 (they are generally designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Bmw Serie 1 F20 is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Bmw Serie 1 F20, please go through our content page on this subject matter.
To discover more tips on the Bmw Serie 1 F20, take a look at the Bmw Serie 1 F20 category.
