If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle at fault – your headlights, also named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Bmw Serie 4 F32? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Bmw Serie 4 F32.
Why adjust the headlights of your Bmw Serie 4 F32?
So let’s begin our content with the interest of adjusting the headlights of your Bmw Serie 4 F32. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Sadly this is not constantly the circumstance and looking at this setting, either because the headlights on your Bmw Serie 4 F32 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Bmw Serie 4 F32 for safety
First of all, the headlight adjustment of a Bmw Serie 4 F32 must be done for a basic security explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Bmw Serie 4 F32 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Bmw Serie 4 F32 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Bmw Serie 4 F32?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Bmw Serie 4 F32? This adjustment may seem a bit complex, but by following the guidelines you should be able to complete it without too much problem.
Preparations to adjust the headlights of a Bmw Serie 4 F32
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Bmw Serie 4 F32
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Bmw Serie 4 F32 (they are in general designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Bmw Serie 4 F32 is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Bmw Serie 4 F32, please browse our content on this subject.
If you have any additional questions about the Bmw Serie 4 F32, do not hesitate to consult our Bmw Serie 4 F32 category.
