If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car at fault – your headlights, as well named high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Audi S3? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi S3.
Why adjust the headlights of your Audi S3?
So let’s start our content with the interest of adjusting the headlights of your Audi S3. For many people, our headlights are adjusted well enough, and they appear to light up enough through the night. Unfortunately this is not always the case and looking at this setting, either because the headlights on your Audi S3 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Audi S3 for safety
First of all, the headlight adjustment of a Audi S3 must be done for a simple security reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Audi S3 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Audi S3 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi S3?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Audi S3? This setting may appear a bit complicated, but by simply following the guidance you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Audi S3
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Audi S3
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Audi S3 (they are generally designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Audi S3 is logical, do not think twice to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Audi S3, please read our content on this subject matter.
If perhaps you have any additional questions about the Audi S3, do not hesitate to consult our Audi S3 category.
