If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car to take responsibility – your headlights, also identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Audi Q8? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi Q8.
Why adjust the headlights of your Audi Q8?
So let’s begin our content with the interest of adjusting the headlights of your Audi Q8. For many of us, our headlights are adjusted good enough, and they appear to light up enough at nighttime. Regrettably this is not always the case and examining this setting, either because the headlights on your Audi Q8 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Audi Q8 for safety
To begin with, the headlight adjustment of a Audi Q8 must be achieved for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Audi Q8 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Audi Q8 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi Q8?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Audi Q8? This setting may appear a bit complex, but by following the instructions you should be able to do it without too much concern.
Preparations to adjust the headlights of a Audi Q8
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Audi Q8
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Audi Q8 (they are in most cases marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Audi Q8 is logical, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Audi Q8, please read our content on this subject.
Whenever you have any additional questions about the Audi Q8, do not hesitate to consult our Audi Q8 category.
