Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car guilty – your headlights, as well known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Audi Q3? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi Q3.
Why adjust the headlights of your Audi Q3?
So let’s start our content page with the benefit of adjusting the headlights of your Audi Q3. For most people, our headlights are adjusted well enough, and they seem to light up enough through the night. Sadly this is not always the case and checking this setting, either because the headlights on your Audi Q3 are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Audi Q3 for safety
First of all, the headlight adjustment of a Audi Q3 must be carried out for a very easy safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Audi Q3 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Audi Q3 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi Q3?
We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Audi Q3? This setting might seem a bit difficult, but by simply following the guidance you should be able to do it without too much trouble.
Preparations to adjust the headlights of a Audi Q3
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Audi Q3
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Audi Q3 (they are generally marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Audi Q3 is logical, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Audi Q3, please browse our content page on this subject.
If you have any additional questions about the Audi Q3, do not hesitate to consult our Audi Q3 category.
