Driving a vehicle is a daily activity for many of us, our roads are not all the time safe, and regardless it’s raining, windy or snowing, we often have no choice but to take our Audi Q3. Not having the ability to act on traffic conditions, we try to have at minimum a safe car! If you are not comfortable, if you have the feeling that your Audi Q3 is pulling to the right, then you are in the right place. Our team made the decision to publish this content to help you discover the cause of this trouble and fairly quickly feel safe behind the wheel of your car. To do this, we will first take a look at the triggers of a Audi Q3 that pulls to the right without vibration and to finish, a car that pulls to the right with vibration.
Audi Q3 that pulls to the right without vibration
Audi Q3 pulling to the right because of the alignment
Let’s start with the case of your Audi Q3 which pulls to the right without vibration, one of the most typical sources of a non-straight trajectory on a car is the alignment , the truth is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually achieved when you swap your tires. Although it is tricky or even impossible to know the condition of your alignment, you can examine the sidewalls of your tires, if you see abnormal wear on your Audi Q3, it is certain that the alignment is at fault. In cases like this, go to your service garage or tyre specialist to correct it.
Audi Q3 pulling to the right because of the tyres
Speaking of tires, parallelism isn’t the only cause for a car that pulls to the right. In actual fact, if you have a difference in pressure on your tires, it is logical that your Audi Q3 is no longer a stable steering. So make sure to verify the pressure of all four tyres. Additionally to the risk of an accident if you experience your Audi Q3 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to swap them quicker.
My Audi Q3 is pulling to the right and I experience vibrations:
Audi Q3 pulling to the right because of the silent blocks
Now let’s look at the case of a Audi Q3 that pulls to the right but also triggers vibrations in the steering wheel. The first basic trigger of trajectory error plus vibration is that your silent blocks are dead. In actual fact, when they are too damaged, they not anymore assume their task of shock absorber and binder between the different elements of your front drivetrain, which brings about a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Audi Q3 pulls to the right. Check their condition and swap them if required. If you want more information on trouble with the silent blocks, please browse our specific content.
My Audi Q3 pulls to the right because of the bearings
Another possibility that your Audi Q3 pulls to the right is that one of your bearings, usually the front one, is dead, you should, furthermore to the trajectory defect, encounter a particular vibration or rolling noise. In actual fact, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which definitely brings about a trajectory defect. Check their condition and have them swapped out if necessary.
My Audi Q3 pulls to the right because of the shock absorbers
Last but not least, your Audi Q3 that pulls to the right and creates vibrations because of the shock absorbers. It doesn’t matter if it’s the damper cup, your tired springs, or a twisted cylinder, every defect associated with the shock absorbers can disturb the common behaviour of the Audi Q3. You should, nevertheless, undergo a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers inspected and ask your repair shop for a replacement if necessary.
If you have any further questions about the Audi Q3, do not hesitate to consult our Audi Q3 category.
