Your car’s handbrake is a mandatory safety feature according to the highway code, in fact , it aims to end your seat cordoba, even on a slight incline. It must be independent of the main brake controls. It will be possible that over time the cable system of the hand brake will loosen up and you will not pass the technical control or you might feel that it can be no longer stopping your car. To address these challenges, we will look at how to adjust the hand brake on your seat cordoba . To accomplish this, first we will see the adjustment of the manual handbrake on seat cordoba , then, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on seat cordoba?
So we start off our article with the hand brake adjustment of a seat cordoba in its manual version. This kind of version performs in a basic way with a system of cable and screws that allow you to manage the tension with the device and thus to modify the stroke with the lever of the handbrake. To act on it you need to act on these types of screws to be able to stretch the handbrake cable of the seat cordoba . In any case, just before adjusting the hand brake, you must be sure your back wheels aren’t blocked throughout the adjustment. Make sure you find below the detailed procedure to carry out this kind of intervention:
- At the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once completed, you should see a trapdoor in your handbrake, open it up to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench to allow you to replace the cable pressure.
- Now screw on the locking mechanism nuts in both sides, make sure you make the exact changes upon both sides to hold a balanced brake, and be sure the hand brake lever of your seat cordoba has a stroke of about 3 notches.
- Tighten up the locknuts and test out the locking of the tires of your car, if it’s good you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimum configuration
.
If you don’t have access to the handbrake flap of the seat cordoba, the adjustment will be exactly the same but it will be done by passing under your car at the level of the handbrake lever. Make sure to put your car on the stand just before any actions.
How do I adjust the automatic handbrake of my own seat cordoba?
Second system of handbrake adjustment in seat cordoba , this is an automatic handbrake, in contrast to the manual one, that one is done directly on the brake drums or calipers, and is supposed to adjust automatically for the wear of the brake shoes or pads. It may be that if you rapidly have to purchase brake pads, the handbrake will lose power, listed below are the steps to consider to check if the strain of your handbrake is the right one:
- Be aware that an automatic handbrake cannot be adjusted straight because it is supposed to adapt alone to the have on of the pads or pads of your seat cordoba.
- You can nonetheless check that the system is functioning effectively by putting the automobile on the stand and verifying by driving under the auto that the brake pads are still in good performing order.
- For drum brakes it is required to take apart the tires to check the state of the shoes, we advise you to have it conducted by a specialist.
- Make sure to change your pads if you need to.
What is the cost of adjusting the handbrake of seat cordoba by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it fears a safety element of your car, namely the adjustment with the handbrake of the seat cordoba , we counsel you to go to a technician who can adjust the handbrake to get a about fifty euros . When you have problems with vibrations when braking on seat cordoba, do not hesitate to refer to our article which deals with this trouble.
If you want more guides on the seat cordoba, go to our seat cordoba category.
