Your car’s handbrake is a required protection feature based on the highway code, in fact , it aims to quit your skoda octavia, even on a slight incline. It must be independent of the main brake system controls. It is also possible that with time the wire system of the hand brake will loosen up and you will not pass the technical control or you may possibly feel that it really is no longer stopping your car. To deal with these problems, we will look at how to adjust the hand brake on your skoda octavia . To accomplish this, first we will see the adjustment of the manual handbrake on skoda octavia , after that, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on skoda octavia?
Therefore we commence our content with the hand brake adjustment of a skoda octavia in its manual version. This version works in a simple way using a system of wire and screws that allow you to control the tension of the device and so to modify the stroke of the lever of your handbrake. To act on it you will need to act on these screws in order to stretch out the handbrake cable of your skoda octavia . In any case, before adjusting the hand brake, you must be sure your rear wheels aren’t blocked during the adjustment. Make sure you find below the detailed treatment to carry out this kind of intervention:
- With the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should discover a trapdoor on your handbrake, open it to see the screw and wire system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable tension.
- Now screw on the lock nuts on both sides, make certain to make the exact changes upon both sides to keep a balanced brake, and be sure the hand brake lever of your skoda octavia has a stroke of about 3 notches.
- Tighten the locknuts and test out the fastening of the rims of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening screws until you get an optimum configuration
.
If you don’t have access to the handbrake flap of your skoda octavia, the adjustment will probably be exactly the same but it will be done by passing beneath your car in the level of your handbrake lever. Make sure put your car on the stand before any action.
How do I adjust the automatic handbrake of my skoda octavia?
Second system of handbrake adjustment on skoda octavia , this is an automatic handbrake, not like the manual one, this one is done upon the brake drums or calipers, and is supposed to change automatically towards the wear of your brake shoes or pads. It may be that if you quickly have to acquire brake pads, your handbrake will lose power, allow me to share the steps to take to verify if the strain of your handbrake is the right one:
- Remember that an automatic handbrake can’t be adjusted directly because it is meant to adapt by itself to the wear of the pads or pads of your skoda octavia.
- You can still verify that the system is functioning effectively by putting the car on the stand and examining by driving under the car that the disc brake pads are still in good working order.
- For drum brakes it is required to take apart the brake systems to verify your the shoes, all of us advise you to have it achieved by a professional.
- Be sure you change your pads if you need to.
What is the price of adjusting the handbrake of skoda octavia by a professional?
Finally, if you do not feel comfortable with this procedure, especially since it worries a safety component of your car, namely the adjustment of the handbrake of your skoda octavia , we inform you to go to a repair shop who can adjust your handbrake to get a about fifty local currency . In case you have problems with vibrations when braking on skoda octavia, do not wait to refer to our content which deals with this issue.
To find more tips on the skoda octavia, take a look at the skoda octavia category.
