Your car’s handbrake is actually a required protection feature according to the highway code, in fact , this aims to end your GMC Sierra, even on the slight incline. It must be in addition to the main brake controls. It is also possible that as time passes the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you might feel that it is no longer blocking your car. To cope with these concerns, we will look at how to adjust the hand brake on your GMC Sierra . To do this, first we will see the adjustment of the manual handbrake on GMC Sierra , then, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on GMC Sierra?
So we start out our content with the hand brake adjustment of a GMC Sierra in its manual version. This kind of version performs in a basic way having a system of cable and screws that allow you to control the tension in the device and thus to modify the stroke in the lever of the handbrake. To act on it you need to act on these kinds of screws to be able to extend the handbrake cable of the GMC Sierra . In any case, prior to adjusting the hand brake, you must check that your back wheels are not blocked through the adjustment. Please find below the detailed procedure to carry out this intervention:
- With the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once done, you should see a trapdoor in your handbrake, open it to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench to allow you to change the cable stress.
- Now screw on the lock nuts upon both sides, be sure to make the comparable changes on both sides to keep a balanced braking, and check that the hand brake handle of your GMC Sierra has a stroke of about three notches.
- Tighten up the locknuts and test out the fastening of the rims of your car, if it’s good you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimum setting
.
If you don’t have access to the handbrake flap of the GMC Sierra, the adjustment will probably be precisely the same but it surely will be done by passing below your car on the level of your handbrake handle. Be sure to set your car on the stand prior to any actions.
How do I adjust the automatic handbrake of my GMC Sierra?
Second approach to handbrake adjustment upon GMC Sierra , this is an automatic handbrake, not like the manual one, this method is done directly on the brake drums or calipers, and is also imagined to change automatically to the wear of the brake shoes or pads. It may be that if you quickly have to get brake pads, your handbrake will suffer power, listed below are the steps to take to check if the tension of your handbrake is the appropriate one:
- Realize that an automatic handbrake cannot be adjusted directly because it is supposed to adapt by itself to the use of the pads or shoes of your GMC Sierra.
- You can nonetheless check that the system is working effectively simply by putting the car on the stand and looking at by driving under the automobile that the pads are still in good functioning order.
- For drum brakes it will be required to take apart the brake systems to check the state of the shoes, all of us recommend you to have it achieved by a professional.
- Make sure to change your pads if you need to.
What is the price of adjusting the handbrake of GMC Sierra by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it worries a security component of your car, namely the adjustment in the handbrake of the GMC Sierra , we counsel you to go to a auto technician that can adjust your handbrake for any about fifty euros . For those who have problems with vibrations when braking on GMC Sierra, do not think twice to refer to our content which works with this trouble.
To find more tips on the GMC Sierra, take a look at the GMC Sierra category.
