Your car’s handbrake is actually a obligatory basic safety feature based on the highway code, in fact , this aims to stop your Chevrolet Cobalt, even on a slight incline. It must be in addition to the main brake controls. It is possible that after a while the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you may feel that it truly is no longer stopping your car. To deal with these complications, we will look at how to adjust the hand brake on your Chevrolet Cobalt . To get this done, first we will see the adjustment of a manual handbrake on Chevrolet Cobalt , then simply, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.

adjust-handbrake-chevrolet-cobalt

Adjusting a manual handbrake on Chevrolet Cobalt?

Thus we commence our document with the hand brake adjustment of a Chevrolet Cobalt in its manual version. This kind of version performs in a basic way using a system of cable and screws that allow you to control the tension on the device and therefore to modify the stroke on the lever of your handbrake. To act on it you will have to act on these kinds of screws in order to stretch the handbrake cable of your Chevrolet Cobalt . In any case, prior to adjusting the hand brake, you must check that your rear wheels are not blocked during the adjustment. Please find below the detailed method to carry out this kind of intervention:

  • In the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
  • Once carried out, you should find out a trapdoor on your handbrake, open it up to see the screw and cable system.
  • You need to locate the locknuts and loosen them with a wrench to allow you to change the cable stress.
  • Now screw on the locking mechanism nuts on both sides, ensure that you make the exact changes upon both sides to hold a balanced braking, and check that the hand brake lever of your Chevrolet Cobalt has a stroke of about 3 notches.
  • Tighten up the locknuts and check the fastening of the wheels of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening screws until you get a great ideal setting

.
If you don’t have access to the handbrake flap of your Chevrolet Cobalt, the adjustment will be exactly the same but it surely will be done by passing beneath your car with the level of your handbrake lever. Remember to put your car on the stand prior to any actions.

How do I adjust the automatic handbrake of my own Chevrolet Cobalt?

Second system of handbrake adjustment on Chevrolet Cobalt , this is an automatic handbrake, unlike the manual one, this place is done upon the brake drums or calipers, which is supposed to change automatically to the wear of your brake shoes or brake pads. It may be that if you before long have to purchase brake pads, your handbrake will lose power, listed below are the steps to take to examine if the tension of your handbrake is the right one:

  • Take note that an automatic handbrake can’t be adjusted straight because it is supposed to adapt themselves to the have on of the brake pads or shoes of your Chevrolet Cobalt.
  • You can nonetheless examine that the system is operating properly by simply putting the car on the stand and checking by driving under the automobile that the brake pads are still in good performing order.
  • For drum brakes it will be required to take apart the tires to examine your the shoes, we all suggest you to have it achieved by a professional.
  • Make sure to change your brake pads if you need to.

What is the price of adjusting the handbrake of Chevrolet Cobalt by a professional?

Finally, if you do not feel comfortable with this procedure, especially since it fears a safety element of your car, namely the adjustment on the handbrake of your Chevrolet Cobalt , we give you advice to go to a repair shop that can adjust your handbrake to get a about fifty euros . When you have problems with vibrations when braking on Chevrolet Cobalt, do not wait to refer to our document which refers to this issue.

If you want more tutorials on the Chevrolet Cobalt, go to our Chevrolet Cobalt category.