Your car’s handbrake is a obligatory basic safety feature according to the highway code, in fact , it aims to stop your Ford Kuga, even on a slight incline. It must be in addition to the main brake controls. It will be possible that as time passes the wire system of the hand brake will relax and you will not really pass the technical control or you may feel that it can be no longer stopping your car. To address these concerns, we will look at how to adjust the hand brake on your Ford Kuga . To do this, first we will see the adjustment of a manual handbrake on Ford Kuga , in that case, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Ford Kuga?
Therefore we begin our article with the hand brake adjustment of a Ford Kuga in its manual version. This version performs in a simple way with a system of wire and screws that allow you to control the tension from the device and thus to modify the stroke from the lever of the handbrake. To act on it you should act on these kinds of screws to be able to stretch the handbrake cable of the Ford Kuga . In any case, just before adjusting the hand brake, you must check that your back wheels aren’t blocked during the adjustment. Make sure you find below the detailed procedure to carry out this kind of intervention:
- With the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once performed, you should see a trapdoor on your handbrake, open it up to see the screw and wire system.
- You will need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable tension.
- Now screw on the locking mechanism nuts about both sides, be sure to make the same changes on both sides to hold a balanced braking, and check that the hand brake handle of your Ford Kuga has a stroke of about three notches.
- Tighten up the locknuts and test out the locking of the rims of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimal setting
.
If you don’t have access to the handbrake flap of the Ford Kuga, the adjustment will probably be exactly the same nonetheless it will be done by passing directly below your car at the level of the handbrake handle. Make sure to put your car on the stand just before any actions.
How do I adjust the automatic handbrake of my own Ford Kuga?
Second system of handbrake adjustment about Ford Kuga , this is an automatic handbrake, unlike the manual one, this place is done upon the brake drums or perhaps calipers, which is expected to adjust automatically to the wear of the brake shoes or brake pads. It may be that if you quickly have to purchase brake pads, the handbrake will suffer power, listed below are the steps for taking to check if the tension of your handbrake is the right one:
- Be aware that an automatic handbrake cannot be modified directly because it is supposed to adapt alone to the put on of the brake pads or pads of your Ford Kuga.
- You can still check that the system is functioning correctly by simply putting the vehicle on the stand and checking out by driving under the car that the pads are still in good functioning order.
- For drum brakes it is necessary to disassemble the brake systems to check the state of the shoes, we advise you to have it done by a professional.
- Remember to change your brake pads if you need to.
What is the price of adjusting the handbrake of Ford Kuga by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it concerns a safety component of your car, namely the adjustment from the handbrake of the Ford Kuga , we give you advice to go to a mechanic who are able to adjust the handbrake for any about fifty euros . For those who have problems with vibrations when braking on Ford Kuga, do not think twice to consult our article which relates to this problem.
If you need more tutorials on the Ford Kuga, go to our Ford Kuga category.
