You’re uninterested in listening to cassettes and only having the ability to enjoy the radio, while your smartphone is full of your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve written and published this content to help you, because now you’re going to learn about how to install a car radio on your Ford Kuga. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Ford Kuga and to finish, how to connect it.

install-car-radio-ford-kuga

How to install car radio on Ford Kuga: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Ford Kuga, there is one essential task, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two ways depending on the stereo that equips your Ford Kuga:

  • Original car radio:
    In cases like this, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Ford Kuga. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Ford Kuga: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Ford Kuga. Ahead of time, take some time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Ford Kuga, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Kuga, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Ford Kuga, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

If you wish more tutorials on the Ford Kuga, go to our Ford Kuga category.