Your car’s handbrake is a obligatory protection feature based on the highway code, in fact , it aims to end your Dacia Sandero, even on a slight slope. It must be independent of the main brake system controls. It is possible that over time the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you may feel that it is no longer stopping your car. To address these complications, we will look at how to adjust the hand brake on your Dacia Sandero . To get this done, first we will see the adjustment of your manual handbrake on Dacia Sandero , then simply, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on Dacia Sandero?
Therefore we start our content with the hand brake adjustment of a Dacia Sandero in its manual version. This version works in a basic way which has a system of cable and screws that allow you to control the tension on the device and so to modify the stroke on the lever of the handbrake. To act on it you need to act on these kinds of screws to be able to expand the handbrake cable of the Dacia Sandero . In any case, before adjusting the hand brake, you must make sure that your rear wheels are not blocked through the adjustment. Make sure you find below the detailed process to carry out this kind of intervention:
- In the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once done, you should discover a trapdoor on your handbrake, open it to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable tension.
- Now screw on the lock nuts upon both sides, be sure to make the exact changes upon both sides to hold a balanced braking, and make sure that the hand brake handle of your Dacia Sandero has a stroke of about 3 notches.
- Tighten up the locknuts and test out the fastening of the rims of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of the Dacia Sandero, the adjustment will probably be precisely the same but it really will be done by passing beneath your car on the level of the handbrake handle. Make sure to put your car on the stand before any actions.
How do I adjust the automatic handbrake of my Dacia Sandero?
Second system of handbrake adjustment upon Dacia Sandero , this is an automatic handbrake, unlike the manual one, this method is done upon the brake drums or calipers, and it is meant to adjust automatically for the wear of the brake shoes or pads. It may be that if you soon have to buy brake pads, the handbrake will suffer power, allow me to share the steps for taking to verify if the tension of your handbrake is the appropriate one:
- Bear in mind that an automatic handbrake cannot be adjusted straight because it is meant to adapt itself to the wear of the pads or pads of your Dacia Sandero.
- You can even now verify that the system is working properly by simply putting the automobile on the stand and verifying by driving under the motor vehicle that the disc brake pads are still in good performing order.
- For drum brakes it is required to disassemble the tires to verify the state of the shoes, we all suggest you to have it completed by a professional.
- Be sure you change your pads if you need to.
What is the price of adjusting the handbrake of Dacia Sandero by a professional?
Finally, if you do not feel comfortable with this procedure, especially since it concerns a security element of your car, namely the adjustment on the handbrake of the Dacia Sandero , we inform you to go to a repair shop that can adjust the handbrake to get a about fifty local currency . When you have problems with vibrations when braking on Dacia Sandero, do not wait to consult our content which works with this trouble.
If you want more tutorials on the Dacia Sandero, go to our Dacia Sandero category.
