Your car’s handbrake is a mandatory security feature according to the highway code, in fact , it aims to stop your Citroen Jumpy, even over a slight incline. It must be independent of the main brake controls. It will be possible that after some time the cable system of the hand brake will relax and you will certainly not pass the technical control or you might feel that it can be no longer stopping your car. To deal with these concerns, we will look at how to adjust the hand brake on your Citroen Jumpy . To get this done, first we will see the adjustment of the manual handbrake on Citroen Jumpy , after that, in a second step, how to adjust an automatic handbrake, and lastly the price of the service performed by a professional.
Adjusting a manual handbrake on Citroen Jumpy?
Therefore we begin our article with the hand brake adjustment of a Citroen Jumpy in its manual version. This version works in a basic way using a system of cable and anchoring screws that allow you to manage the tension on the device and therefore to modify the stroke on the lever of the handbrake. To act on it you will have to act on these screws in order to stretch the handbrake cable of the Citroen Jumpy . In any case, prior to adjusting the hand brake, you must check that your rear end wheels aren’t blocked during the adjustment. Please find below the detailed treatment to carry out this intervention:
- In the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once completed, you should see a trapdoor on your handbrake, open it to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to replace the cable tension.
- Now screw on the locking mechanism nuts on both sides, make sure to make the same changes upon both sides to hold a balanced brake, and check that the hand brake handle of your Citroen Jumpy has a stroke of about three notches.
- Tighten the locknuts and test the locking of the rims of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening anchoring screws until you get an ideal configuration
.
If you don’t have access to the handbrake flap of the Citroen Jumpy, the adjustment will be exactly the same however it will be done by passing beneath your car on the level of the handbrake handle. Make sure put your car on the stand prior to any action.
How do I adjust the automatic handbrake of my own Citroen Jumpy?
Second system of handbrake adjustment on Citroen Jumpy , this is an automatic handbrake, unlike the manual one, this one is done on the brake drums or calipers, and it is meant to adapt automatically towards the wear of the brake shoes or brake pads. It may be that if you quickly have to get brake pads, the handbrake will suffer power, listed below are the steps to take to verify if the tension of your handbrake is the right one:
- Realize that an automatic handbrake can not be adjusted directly because it is meant to adapt alone to the wear of the brake pads or pads of your Citroen Jumpy.
- You can still verify that the system is operating effectively by putting the automobile on the stand and looking at by driving under the automobile that the brake pads are still in good working order.
- For drum brakes it will probably be necessary to disassemble the tires to verify your the shoes, all of us recommend you to have it achieved by a specialist.
- Be sure you replace your brake pads if you need to.
What is the price of adjusting the handbrake of Citroen Jumpy by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it worries a safety component of your car, namely the adjustment on the handbrake of the Citroen Jumpy , we counsel you to go to a repair shop who can adjust the handbrake for a about fifty local currency . When you have problems with vibrations when braking on Citroen Jumpy, do not think twice to consult our article which refers to this issue.
To get more tips on the Citroen Jumpy, take a look at the Citroen Jumpy category.
