Your car’s handbrake is actually a mandatory security feature according to the highway code, in fact , this aims to end your Audi Q2, even on the slight slope. It must be independent of the main brake controls. It will be possible that after some time the wire system of the hand brake will loosen up and you will certainly not pass the technical control or you may possibly feel that it truly is no longer stopping your car. To address these complications, we will look at how to adjust the hand brake on your Audi Q2 . To get this done, first we will see the adjustment of a manual handbrake on Audi Q2 , after that, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Audi Q2?
Therefore we begin our content with the hand brake adjustment of a Audi Q2 in its manual version. This kind of version works in a simple way using a system of wire and anchoring screws that allow you to control the tension of the device and therefore to modify the stroke of the lever of the handbrake. To act on it you must act on these kinds of screws in order to extend the handbrake cable of the Audi Q2 . In any case, just before adjusting the hand brake, you must be sure your rear end wheels are certainly not blocked throughout the adjustment. Please find under the detailed technique to carry out this intervention:
- On the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once performed, you should see a trapdoor in your handbrake, open it up to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to replace the cable pressure.
- Now screw on the lock nuts on both sides, make certain to make the same changes upon both sides to keep a balanced brake, and be sure the hand brake handle of your Audi Q2 has a stroke of about 3 notches.
- Tighten the locknuts and test out the fastening of the tires of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening anchoring screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of the Audi Q2, the adjustment will be precisely the same but it surely will be done by passing beneath your car on the level of the handbrake handle. Make sure you set your car on the stand just before any action.
How do I adjust the automatic handbrake of my Audi Q2?
Second approach to handbrake adjustment on Audi Q2 , this is an automatic handbrake, in contrast to the manual one, that one is done directly on the brake drums or calipers, which is supposed to change automatically towards the wear of the brake shoes or pads. It may be that if you shortly have to acquire brake pads, the handbrake will lose power, listed below are the steps to consider to check if the tension of your handbrake is the right one:
- Bear in mind that an automatic handbrake can not be adjusted straight because it is designed to adapt itself to the use of the pads or pads of your Audi Q2.
- You can even now check that the system is working correctly by simply putting the automobile on the stand and examining by driving under the car that the pads are still in good working order.
- For drum brakes it will be necessary to take apart the brake systems to check the state of the shoes, we all recommend you to have it conducted by a professional.
- Remember to replace your pads if you need to.
What is the price of adjusting the handbrake of Audi Q2 by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it questions a safety component of your car, namely the adjustment of the handbrake of the Audi Q2 , we advise you to go to a technician who are able to adjust the handbrake for any about fifty local currency . For those who have problems with vibrations when braking on Audi Q2, do not think twice to refer to our content which works with this issue.
To discover more tips on the Audi Q2, take a look at the Audi Q2 category.
