It doesn’t matter if you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Despite the fact this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this simple modification, and in this document, we will see how to adjust the low beam lights of your volvo v70? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your volvo v70.

set-low-beam-headlights-volvo-v70

Why set the low beam lights of your volvo v70?

So let’s start our document with the advantage of adjusting the low beam lights of your volvo v70. For a lot of people these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and examining this setting, either because the low beams of your volvo v70 are not lighting up well, or because you have the sense that they are too low or too powerful is a wise decision .

Adjusting the low beam of your volvo v70 for safety is a wise decision.

To begin, the adjusting of the dipped headlights of an volvo v70 must be done for a elementary safety cause. Regardless whether it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore important for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an volvo v70 for legal motives

Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a volvo v70?

We will now move on to the part that interests you the more in this document, how to adjust the low beams of his volvo v70? This setting may sound a bit difficult, but if you follow the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a volvo v70

First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure rigorously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his volvo v70

Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your volvo v70 (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, check that the low beam setting of your volvo v70 is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your volvo v70, please go through our document on this subject.

To discover more tips on the volvo v70, take a look at the volvo v70 category.