Regardless whether you feel you can’t see as well during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your motor vehicle to blame – your low beams. Although this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this simple manipulation, and in this content page, we will discover how to adjust the low beam lights of your Volkswagen Coccinelle? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Coccinelle.
Why set the low beam lights of your Volkswagen Coccinelle?
So let’s start our content page with the advantage of adjusting the low beam lights of your Volkswagen Coccinelle. For many of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not always the case and examining this setting, either because the low beams of your Volkswagen Coccinelle are not illuminating well, or because you have the feeling that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Volkswagen Coccinelle for security is a wise decision.
Firstly, the adjusting of the dipped headlights of an Volkswagen Coccinelle must be done for a elementary security cause. Regardless whether it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Coccinelle for law justifications
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Coccinelle?
We will now move on to the part that interests you the more in this content page, how to adjust the low beams of his Volkswagen Coccinelle? This setting may seem to be a bit difficult, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Volkswagen Coccinelle
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Coccinelle
Once your motor vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Coccinelle (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Volkswagen Coccinelle is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Volkswagen Coccinelle, please examine our content page on this subject.
To get more tips on the Volkswagen Coccinelle, take a look at the Volkswagen Coccinelle category.
