It doesn’t matter if you feel you can’t see good enough at nighttime, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Although this adjustment may look simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple modification, and in this article content, we will see how to adjust the low beam lights of your Volkswagen Eos? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Eos.
Why adjust the low beam lights of your Volkswagen Eos?
So let’s commence our article content with the benefit of adjusting the low beam lights of your Volkswagen Eos. For many of us these lights are well enough adjusted, and it seems that they light up enough at night. However this is not necessarily the case and checking out this setting, either because the low beams of your Volkswagen Eos are not illuminating well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Volkswagen Eos for safety is a good idea.
First of all, the adjusting of the dipped headlights of an Volkswagen Eos must be done for a simple safety purpose. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Eos for law motives
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Eos?
We will now move on to the part that concerns you the most in this article content, how to adjust the low beams of his Volkswagen Eos? This setting may appear a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Volkswagen Eos
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Eos
Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Volkswagen Eos (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Volkswagen Eos is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Volkswagen Eos, please read our article content on this subject.
If perhaps you have any further questions about the Volkswagen Eos, do not hesitate to consult our Volkswagen Eos category.
