Regardless you feel you can’t see as well at night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Despite the fact this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this simple realignment, and in this content page, we will find out how to adjust the low beam lights of your Volkswagen Caddy 3? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Caddy 3.
Why adjust the low beam lights of your Volkswagen Caddy 3?
So let’s start our content page with the benefit of adjusting the low beam lights of your Volkswagen Caddy 3. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and verifying this setting, either because the low beams of your Volkswagen Caddy 3 are not illuminating well, or because you have the sense that they are too weak or too strong is a good plan .
Adjusting the low beam of your Volkswagen Caddy 3 for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Volkswagen Caddy 3 must be done for a simple safety cause. It doesn’t matter if it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is consequently important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Caddy 3 for law reasons
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Caddy 3?
We will now move on to the section that interests you the most in this content page, how to adjust the low beams of his Volkswagen Caddy 3? This setting may appear to be a bit difficult, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volkswagen Caddy 3
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Caddy 3
Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Volkswagen Caddy 3 (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Volkswagen Caddy 3 is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volkswagen Caddy 3, please examine our content page on this subject.
To discover more tips on the Volkswagen Caddy 3, take a look at the Volkswagen Caddy 3 category.
