Regardless you feel you can’t see as well through the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your car to blame – your low beams. Although this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this ordinary realignment, and in this article, we will find out how to adjust the low beam lights of your Volkswagen Amarok? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Amarok.


Why set the low beam lights of your Volkswagen Amarok?

So let’s commence our article with the benefit of adjusting the low beam lights of your Volkswagen Amarok. For most people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and looking at this setting, either because the low beams of your Volkswagen Amarok are not illuminating well, or because you have the sense that they are too low or too powerful is a wise decision .

Adjusting the low beam of your Volkswagen Amarok for security is a wise decision.

To begin, the adjusting of the dipped headlights of an Volkswagen Amarok must be done for a elementary security purpose. Whether it’s for you, or for the other drivers you come across during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Volkswagen Amarok for law motives

In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Volkswagen Amarok?

We will now go forward to the section that interests you the most in this article, how to adjust the low beams of his Volkswagen Amarok? This setting may sound a bit complicated, but if you stick to the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a Volkswagen Amarok

To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure cautiously.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Volkswagen Amarok

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Volkswagen Amarok (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, verify that the low beam setting of your Volkswagen Amarok is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Volkswagen Amarok, please read our article on this subject.

If perhaps you have any further questions about the Volkswagen Amarok, do not hesitate to consult our Volkswagen Amarok category.