Regardless you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may appear easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this basic manipulation, and in this article content, we will see how to adjust the low beam lights of your Vauxkhall Moka? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Vauxkhall Moka.


Why set the low beam lights of your Vauxkhall Moka?

So let’s start our article content with the interest of adjusting the low beam lights of your Vauxkhall Moka. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and examining this setting, either because the low beams of your Vauxkhall Moka are not illuminating well, or because you have the sense that they are too low or too powerful is a good option .

Adjusting the low beam of your Vauxkhall Moka for safety is a good option.

To begin, the adjusting of the dipped headlights of an Vauxkhall Moka must be done for a elementary safety reason. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently necessary for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Vauxkhall Moka for legal reasons

Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Vauxkhall Moka?

We will now move on to the part that interests you the more in this article content, how to adjust the low beams of his Vauxkhall Moka? This setting may sound a bit difficult, but if you stick to the recommendations you should be able to do it without too much issue.

Preparations to set the low beam of a Vauxkhall Moka

To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Vauxkhall Moka

Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Vauxkhall Moka (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, check that the low beam setting of your Vauxkhall Moka is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Vauxkhall Moka, please read our article content on this subject.

In the event that you have any additional questions about the Vauxkhall Moka, do not hesitate to consult our Vauxkhall Moka category.